
Roofing in Salmon Arm, BC
Metal, shingle and flat roofing for Salmon Arm homes and buildings, from a crew based just down the Trans-Canada in Blind Bay.
- Metal roofs with flashing made in our shop
- A short drive from our Blind Bay shop
- Siplast Select & Soprema PAC+S contractor
- Roof loans up to $100,000
Salmon Arm is close to home for us. Advantage Roofing Ltd. works out of Blind Bay, at #3 – 2417 Golf Course Drive, a short drive west along the Trans-Canada. Our whole team lives and works in the Shuswap, and we’re in Salmon Arm regularly for estimates, new roofs and repairs. We’ve been roofing around the Shuswap since 2012 and now complete more than 150 residential and commercial roofs a year.

Roofing in a Shuswap Lake climate
A roof in Salmon Arm has to live with the lake. Winters bring snow that can deepen when cold air moves across Shuswap Lake, then freeze and thaw as the temperature swings. Shoreline homes in Canoe, Raven and Sunnybrae also take wind coming off the water. Farther from the beach, in Hillcrest and Broadview, on acreages in Gleneden and Tappen, and out the Salmon River valley, snow and shade can sit longer. On the Mount Ida side of town, north-facing or tree-covered roofs often hold more moisture, which is when moss and tired flashings start to show.
Summers still get hot and dry, so a roof here has to deal with both ends of the year: sun and heat, then snow, melt and wind. That mix is hard on aging shingles, worn valleys and poorly drained low-slope sections.
Roofing services in Salmon Arm
Whether you’re in town or out toward Canoe or Tappen, we can quote and install:
- Standing seam metal roofing with Titelock 12-inch snap-lock panels and flashing formed in our own metal shop
- GAF asphalt shingle roofs such as Timberline HDZ; qualifying installs can carry Silver Pledge or Golden Pledge coverage
- SBS torch-on and TPO membrane for flat roofs and low-slope sections
- Leak and repair work on metal, shingle and membrane roofs
- Commercial roofing and re-roofing for local businesses and buildings
If you’re choosing a colour, our Roof Colours page shows the Titelock metal palette and the GAF shingle colours we install.
Metal roofing in Salmon Arm
Standing seam metal is a strong fit for this climate. Snow slides off a smooth panel, the surface stands up to summer sun, and it will not burn, which matters through a dry Shuswap summer. We run Titelock 12-inch snap-lock panels and bend the ridge, valley, eave and wall flashings in the Blind Bay shop, so the trim is made for the roof in front of us, not pulled from a generic pile.
On a conventional pitched house, GAF Timberline HDZ shingles remain a solid, well-priced option. What keeps a shingle roof working through Salmon Arm winters is the detail underneath: ice-and-water protection along eaves and in valleys, ventilation that actually moves air, and flashing that stays tight through freeze-thaw. Where the job qualifies, Silver Pledge or Golden Pledge coverage is available, and that pitched-roof work is done as a GAF Master Elite contractor.
The photo on this page is a white TPO membrane we installed in Salmon Arm, with rows of skylights and the hills behind. Flat and low-slope roofs on commercial buildings, additions and some newer homes get SBS or TPO from us, with drainage and edge flashing planned so melt and rain have somewhere to go. That membrane work is backed by our credentials as a GAF GoldElite™ Commercial Contractor, a Siplast Select Contractor and a Soprema PAC+S Contractor.
What to expect
Every Salmon Arm job starts with a visit to the property. We look at the deck, flashing, ventilation and drainage, then price the system that fits (metal, shingle or membrane), or a repair when that will do the job. Estimates and scheduling run through our Blind Bay office, open Monday to Friday, 9 a.m. to 2 p.m. There is no separate Salmon Arm shop; the same crew that measures the roof is the one that installs it.
From Salmon Arm we also roof south in Enderby, Armstrong and Vernon, west toward Kamloops, and east in Revelstoke.
Financing
The cost of a new roof can be spread out with Financeit, which lends up to $100,000 for roofing. Checking whether you pre-qualify does not commit you to the work.
Get a quote
Ready to price a roof in Salmon Arm? Call 250-253-7663, email office@advantageroofingltd.ca, or use our online Get a Quote form. We’ll set a time to come over from Blind Bay and see the roof up close.
FAQs
Do you have a roofing office in Salmon Arm?
No. Our only office and metal shop are in Blind Bay, at #3 – 2417 Golf Course Drive, a short drive west along the Trans-Canada. Calls are taken Monday to Friday, 9 a.m. to 2 p.m., and the crew comes into Salmon Arm for site visits and installs.
Do you install metal roofing in Salmon Arm?
Yes. We install standing seam metal in Salmon Arm using Titelock 12-inch snap-lock panels, with the flashing bent in our own shop. If GAF shingles or a membrane roof suit the building better, we’ll quote that instead. Colour samples are on our Roof Colours page.
Which areas of Salmon Arm do you serve?
We work across Salmon Arm and the nearby communities, including well-known areas such as Canoe, Raven, Hillcrest, Broadview, Gleneden, Tappen, Sunnybrae and the Salmon River valley.
Can a Salmon Arm roof be financed?
Yes, through Financeit, up to $100,000. Bring it up with your estimate; checking eligibility is free and does not obligate you to book.
How do I book an estimate?
Call 250-253-7663, email office@advantageroofingltd.ca, or fill out the Get a Quote form. Someone from our Blind Bay crew will come over to look at the roof.
Planning a new roof in Salmon Arm?
Give us a call or send the quote form. We’ll come over from Blind Bay, look the roof over and come back with a straight price.
